Company: Foshan rockbass glass precision machinery Co., Ltd.
Address: Xingye North Road, Shishan, Nanhai, Foshan, Guangdong, China (market side of Beiyuan)
Phone: 0757-86432323

Precautions and maintenance of glass edger


The glass edging machine is mainly used for the grinding of glass products and the production of some special shapes. In the process of equipment work, it will involve cutting, polishing and other processes. It needs the correct operation of the staff to avoid safety or quality problems, and to properly maintain the glass edging machine and extend its service life. Next, Ruifei technician will introduce the precautions and maintenance methods of the glass edger.

Precautions for use of glass edger:

1. After the edger is purchased, the user's Manual shall be read before use to understand the transmission principle of the equipment, the function and use mode of various handles, hand wheels, electrical buttons, water and gas regulating valves before operation.

2. The stepless transmission is usually used in the edging machine. When adjusting the speed, it must be in the open state, otherwise it is easy to damage the stepless transmission of the edging machine.

3. The quality of the grinding head of the edger has a great influence on the grinding quality of the glass. The position and moving clearance of the grinding head have been adjusted before leaving the factory. In addition to the forward and backward grinding heads, the rest are generally not moved to avoid affecting the grinding quality. In addition, the back position of the grinding head is not easy to be too large, otherwise it is easy to damage the waterproof sleeve, cause water leakage, and easily burn the motor.

4. There is a great relationship between the grinding effect of the edger and whether the cooling is sufficient. Therefore, it is necessary to check whether the cooling pipeline is blocked frequently. In particular, the pipeline of the linear edger is easy to be blocked by the brush hairs, and it is not easy to be detected after blocking, which will cause insufficient cooling and affect the edging quality.

Maintenance of glass edger:

1. The cleaning cycle of the glass edger is 1 day / time, and the sundries irrelevant to production need to be cleaned.

2. When the water tank is used to supply circulating water, the circulating water needs to be replaced after processing every day to prevent the glass powder from blocking the water pump and water pipe. The cycle is about 15 days / time. It should be noted that when changing water, please unplug the power plug first, then take out the water tank, pour out the waste water, and clean the dust in the water tank and the filter screen.

3. In order to ensure the smooth and normal operation of the chain, gear and screw rod of the glass edger, it is necessary to apply lubricating grease on a regular basis, about once a month.

About the precautions and maintenance methods of the glass edger, I will introduce them here today. The glass edging machine needs correct use and maintenance to ensure the normal operation of the equipment, reduce the occurrence of faults and extend the use time of the equipment.